Rammer

Rammer 777E

Reliable and versatile Rammer 777E is designed for optimum carrier compatibility in the 2.6 to 9.5 ton range.

Interested?

787.785.9777

Description

The Rammer 777E provides dependable performance in tougher ground conditions, including rock excavation, concrete removal, and trenching through hard material. Designed for mid-size excavators, it offers a strong balance of impact energy, reliability, and operator control. Its robust construction reduces wear and extends service intervals, helping crews stay focused on production rather than repairs — a reliable tool for contractors tackling demanding daily workloads.

Features

High pressure membrane accumulator
Membrane-type accumulator eliminates Nitrogen leakages, ensuring constant maximum impact power and eliminating the need for recharging in field.
Twin handed, smart
A connecting block allows easy adaptation to different excavator setups. This twin handed design allows optimal mounting on both left and right handed carriers, prolonging the service life of the hose connections. Easy installation with hydraulic quick hitch mounting brackets.
Tubular accumulator
The leak-free tubular accumulator is filled with nitrogen and requires no maintenance or time-consuming recharging between maintenance intervals. With its large surface area and short hydraulic connections to the piston, it effectively reduces pressure fluctuations in the hydraulic system and ensures maximum piston acceleration and high impact frequency. This design provides 100% power at all times.
Vibration and sound suppressed
Less vibrations and at the same time significantly lower noise levels are achieved with this ultra-modern, low-wear design. This protects the operator, the carrier and relieves the environment. This extends your range of applications on narrow job sites and wherever noise protection is required.
Flange mounting
The Flange mounting design allows for the use of existing mounting plates, as well as carrier and application specific customization.
CBE+ (Constant Blow Energy plus)
The RAMMER CBE-System (CBE = Constant Blow Energy) with the active pressure control valve and the permanently filled tubular accumulator maintains the hydraulic pressure level to ensure that each impact delivers the maximum possible power. The RAMMER CBE system accepts a wide range of oil flows and high back pressures, allowing a wide range of carriers to be used. The “+” stands for safe and fast connection to the carrier.
No tie rods
A smart design without tie rods allows for ideal guidance of the piston and optimal alignment of the tool. Fast, safe and easy to maintain without the need for special tools.
Single part tool bushing retained with shared tool pin
The one-piece quick-change tool bushing inludes a thrust ring, the upper and the lower tool bushing into one component. This quick-change tool bushing can easily be replaced on site, making maintenance easier, faster and safer.
Fast-change tool system
Quick and safe tool change system transverse to the hammer. No need to reach under the hammer during tool change.
RD3 incl. SAM (as standard)
RD3 for SAM as standard. Online hour meter and location tracking in Google MapsTM. For further information, please contact your Rammer distributor.

Primary demolition
Demolition of standing buildings and structures.
Trenching
Trenching is a form of primary breaking in which a narrow trench is excavated especially for laying pipes, cables or for installing drainage
Secondary demolition
Demolition of larger pieces on the ground (size reduction, separation and preliminary sorting tasks)
Cutting of asphalt or frozen ground
The RAMMER “Spade tool” was specially developed for cutting of asphalt or frozen ground in road construction or infrastructure.
Landscaping
Gardening, graveyard and landscaping applications, hard ground and removal of smaller boulders, concrete fundaments or similar.
Ground Compacting
With special compacting plate tool.
Rental
Rental includes most applications

Specifications

Min. working weight, flange mounted *1	390 kg (860 lb)
Weight	320 kg (710 lb)
Impact rate (frequency)	500 – 1,700 bpm
Operating pressure	90 – 140 bar (1,305 – 2,030 psi)
Oil flow range	40 – 120 l/min (11 – 32 gal/min)
Pressure relief setting *2	140 – 190 (2,030 – 2,755 ) ¹⁾
Pressure relief max	220 bar
Pressure in LP-circuit	36 – 38 (520 – 550 )
Back pressure max	20 bar (290 psi)
Input power	28 kW (38 hp)
Tool diameter	80 mm (3 in)
Pressure line connection (IN)	BSPP-internal 3/4″
Return line connection (OUT)	BSPP-internal 3/4″
Pressure line size, min. inner diameter	19 mm (1 in)
Return line size, min. inner diameter	19 mm (1 in)
Optimum oil temperature	40 – 60 °C (104 – 140 °F)
Allowed oil temperature range	– 80 °C ( – 176 °F)
Optimum oil viscosity at operating temperature	30 – 60 cSt
Allowed viscosity range	20 – cSt
Skid steer, robot weight, optimum	3 – 5 t (7,300 – 11,500 lb)
Skid steer, robot weight, range *3	3 – 6 t (5,700 – 13,900 lb) ²⁾
Noise level, measured (2000/14/EC)	120.00 dB(A)
Noise level, guaranteed (2000/14/EC)	124.00 dB(A)
Miniexcavator, tractor backhoe weight, Optium	5 – 8 t ( – lb)
Miniexcavator, tractor backhoe weight, Range *3	4 – 10 t (9,500 – 20,900 lb)

Minimum setting = actually measured operating pressure + 50 bar or 725 psi
Check carrier allowed attachment weight from carrier manufacturer. Check application requirements.

WHY CHOOSE R&B POWER?

Authorized distributor of leading brands
Local inventory available
Fast-delivery parts

Certified technicians
After-sales technical support
Parts available for pickup or fast delivery across the island

No complications. No excuses. Just results.

Need equipment, parts, or service?

We’re ready to help.

Visit us

BAYAMÓN:
Luchetti Industrial Park #345 Street A, Bayamón, PR 00961
Call now: (787) 785-9777
PIN: https://maps.app.goo.gl/LBMZrYTk5QLife2y8

HATILLO:
Carr. #2 Km. 8.5 Bo. Carrizales, Hatillo, PR 00659
Call now: (787) 898-4090
PIN: https://maps.app.goo.gl/BZT9y8Wku32n5LLK8